Question:
Mee sreyobhilashi audio songs download. Ask the question you have about the Duracell Jump-Starter 750 here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Duracell Jump-Starter 750 owners to provide you with a good answer.
I have a duralast 700 Peak amp jump starter. Im trying to charge my car battery but it only shows FL. The light in the car comes on but soon as I crank the car it goes off, back to dead. How can I get it to show a percentage thats left in the battery and get it to charge?
asked by: Martia
Expert Reply:
FL on the display of the Peak Performance Jump Starter # PKC0AZ indicates that the internal battery of the charger is full. When you connect it to a vehicle battery and put it in the ON position it should read the percentage battery life of the vehicle battery. If your battery won't register at all and the battery immediately goes dead when you crank it that would indicate typically that the battery of the vehicle is totally dead unfortunately.
Video/Article/FAQ this Question was Asked From
Article or Videomine is brand new. manual says CHARGE it 24 hrs before using. Indicator says FL so it probably wont charge due to intelligent system. so I hooked up a radio to the 12 volt receptacle and the FL turned into 84, so i let it run and see if anything would change. after an hour, it still ready 84 and if i turn off the charger, it reads FL64251
the peak performance jump starter w/ work light - 900 amps# pkc0azshould be charged the first time for 36 hours according to the instructions. after that a typical charge time is 18-24 hours. i recommend putting it on the charge for that full 36 hours which should help calibrate the digital display. 54514